Pellet Type

Properties	Grades	MFR*1 (g/10min)	OTR*2 (cc 30µm/㎡ day atm)	Applications		Packaging unit （㎏）
				Film	Injection molding
Basic grade	BVE8049P*	4.3	0.4	〇	〇	25
High fluidity grade	AVE8077P* (OKS-8077P)	30	0.4	×	〇	25
Flexible grade	OKS-8074P*	3.5	0.5	〇	×	25

*1：2,160g, 210℃
*2：23℃, 65%RH
* Recommended grade for food package applications
The numbers above are sample values, and are not guaranteed.

・Casting grades of Nichigo G-Polymer™ are provided with water content control and in a moisture-resistant package. There is no need for pre-drying before casting.
・Nichigo G-Polymer™ is an absorbent resin. If the package is left unopened for a long time, it may absorb moisture and cause foaming during casting. Use heat-sealing to hermetically seal the package for storage.
・Redrying is not recommended because it may cause yellowing or F.E.
・To the extent possible, avoid leaving Nichigo G-Polymer™ in processing equipment. Doing so could result in foaming and gelification. When stopping processing, purge with LDPE or LLDPE. The maximum amount of time it can be left in equipment is approximately 20 minutes.